Description
Camera Serial Number: 4931618
D.O.M: October 1981
Workshop Checklist:
✅Full check for lens / viewfinder dust, haze or fungus.
✅Exposure meter / needle mechanism air dusted, cleaned and lubricated.
✅Under Exposure Red Flag air dusted, cleaned, lubricated and checked in low to bright light.
✅Internal wiring checked.
✅Light seals replaced with high grade new seals.
✅Rear Door catch and correct fit / alignment.
✅Focus settings checked.
✅ASA settings checked.
✅Camera rattle check for any loose screws or parts in camera.
✅Viewfinder and Micro Window air dusted and cleaned.
✅Aperture blades checked in low / bright light and through the f stops for correct exposure position.
✅1/40 and 1/200 Shutter speed check.
✅Winding and rewinding mechanisms checked are operating smoothly.
✅Frame counter checked from 1 to 36 exposures with test film.
✅Interior film chamber cleaned and sanitised.
✅Camera body cleaned, polished and sanitised.
✅Silica Gel pouch placed in film compartment.
⚙️Lens stripped and cleaned.
⚙️Viewfinder cleaned inside, tightened and tape cover replaced.
⚙️Aperture mechanism disassembled, cleaned and tested.
⚙️Shutter button mechanism cleaned and lubricated.
⚙️Black and Silver body touch up paint.
⚙️Remove old skin, alcohol clean body and replace with correct grade camera leather.
Jason’s workshops notes:
Camera lens had some obvious dust and haze but quality time spent stripping the whole lens and cleaning to as new standard. Red flag was bit sluggish but improved after lighter fuel clean on mechanism and once the aperture blades were cleaned, the red flag worked like new again.